Using The Timer; Using The Play/Record Timer - Panasonic SC-PM11 Operating Instructions Manual

5
1
2
2
3
2
4
1
DEMO
2
1
FOR PLAY TIMER
2
DEMO
3
1
FOR PLAY TIMER
2
DEMO
4
PLAY /
REC
5
22
RQT5706
FOR PLAY TIMER FOR RECORD TIMER
/ REW / / FF/
FOR RECORD TIMER
ON
PLAY
/ REW / / FF/
FOR RECORD TIMER
OFF
PLAY
FOR PLAY TIMER FOR RECORD TIMER
PLAY

Using the timer

Using the play/record timer

The timer has two functions. It can be set to on at a certain time to
wake you up, or it can be set to record the radio or from the aux
source.
The play timer cannot be used in combination with the record timer.
Preparations:
•
Turn the unit on and set the clock (A page 9).
•
For the play timer, prepare the music source you want to listen
to; tape, CD, radio or aux, and set the volume.
2
•
1 For the record timer, check the cassette's erasure prevention
tabs (A page 18: B), insert the tape in deck, select the reverse
mode (A page 19) and tune to the radio station (A page 15) or
3
1 select the aux source (A page 24).
Press [CLOCK/TIMER] to select the timer function.
Every time you press the button:
CLOCK
rPLAY : to set the play timer
rREC
Setting the start and finish times
(Within 8 seconds or so)
1 Press [g/REW/3] or [4/FF/f] to select the
starting time.
2 Press [CLOCK/TIMER].
1 Press [g/REW/3] or [4/FF/f] to select the
ON finishing time.
REC
2 Press [CLOCK/TIMER].
The start and finish times are now set.
Turning the timer on
Press [rPLAY/rREC].
Every time you press the button:
PLAY
(OFF)
rPLAY : to turn the play timer on
rREC
Press [f/I, POWER] to turn the unit off.
The unit must be off for the timers to operate.
OFF
•
For play timer
REC
The timer play will start at the preset time with volume
increasing gradually up to the volume level you preset.
•
For record timer
The record timer comes on about 30 seconds earlier than
the set time.
To cancel the timer
Press [rPLAY/rREC] to clear the timer indicators from the display.
The timer comes on at the set time everyday if the timer is on.
To change the settings (when unit is on)
•
To change the play/record times
Do steps 1, 2, 3 and 5.
REC
•
To change the source or volume
1. Press [rPLAY/rREC] to clear the timer indicator from the
display.
2. Make changes to the source or volume.
3. Do steps 4 to 5.
(Continued on next page)
PLAY REC
Previous display
: to set the record timer
REC
: to turn the record timer on