Living Mode Switching - Panasonic Windea VGDT18143W Simple Manual

Living Mode Switching

(For base unit)
You can set the appropriate state of the base unit for each living mode by selecting the current
living mode ("Absence"/"Sleeping"/"Home") if "Living mode: On" is set in the installation setting.
Switch the living mode in accordance with the scene.
An installation setting is required to use the living mode "Absence, Sleeping, Home"
Installer
Setting switching function.
(Consult with the management company or the company that installed the system.)
This is displayed when the security
is set to "Individual Alarm".
Living mode display area
●
Current living mode is
displayed.
● Press this to switch
the Living mode.
■ Contents that are set (initial setting)
Absence Security
Living mode
( Page 87) (
Absence On (Immediately)
Sleeping Off
Home Off
●
The security vigilance cannot be turned off with the living mode switching when the security setting
Note
is set to "On" in all living modes.
● "Select Living Mode" appears in the living mode display area when the status and setting of security
from the current living mode, or the Not-home setting is changed by disarming the security vigilance
or security alarm. Select the living mode again.
●
The available functions vary depending on the installed facilities.
*1 Installation setting is required. (Consult with the management company or the company that
installed the system.)
*2 Electronic lock of the unit entrance.
84
● The Illustration is in Home mode
E. lock Elevator
*1 Ringtone Volume *1 *2
Page 87) ( Page 88) ( Page 88) ( Page 88)
On No link No link No link
Off No link No link No link
Off No link No link No link
1
Press the MENU button in the
waiting state (nothing is
displayed on the screen)
●
The Top Menu screen appears.
2
Touch the "Living mode display
area"
●
The Mode Change screen appears.
The current living mode and the security
Note
state may not match when the security state
is turned off by individual alarm. In such
case, "Select Living Mode" appears in the
living mode display area, so select the living
mode again.
3
Touch the living mode you want
*1
to change
●
It will switch to the changed living mode.
Example: To switch from Home mode to
● It will return to the Top Menu screen
when
living mode appears.
Switching the Living Mode
Sleeping mode
is touched, and the selected
The selected living
mode appears.
復旧/警報音停止
RESET/ STOP ALARM
MENU button
電源
火災 FIR E ガス GAS 留守 NOTHOME 警戒 S ET 戸締り OPEN
POWER
Press
Touch
● In Home mode
Touch
Touch
85