Husqvarna 356BTx Workshop Manual page 34

7 Repairs
8. Fit the cylinder in and tighten the cylinder. Tighten
the screws with 8-10 Nm of torque.
9. Mount the hub. Check that the hub is seated in the
wedge groove on the crankshaft.
10. Use piston stop tool 502 54 15-01 to prevent
piston rotation.
11. Tighten the centre nut with 22-24 Nm of torque.
12. Mount the starter hooks with the accompanying
spring. Check that the starter hooks move freely.
502 54 15-01
13. Place the motor package and fan spiral according
to Assembling the motor package and fan spiral
on page 28.
34
8015-021
8015-018
8015-020