Commissioning And Diagnostics - Siemens SIMATIC IM 151/CPU Manual

Commissioning and Diagnostics

Configuring the IM 151/CPU with STEP 7
This chapter outlines how to configure an ET 200S for the IM 151/CPU with
STEP 7 .
Resetting the Memory of the IM 151/CPU
Under certain circumstances you have to reset the memory of the CPU component
of the IM 151/CPU. This chapter describes these circumstances and the procedure
for resetting the memory of the CPU component.
Diagnostic Options
The ET 200S distributed I/O system is designed to make handling and
commissioning as simple as possible. If a fault or an error should occur in spite of
this, you can analyze it using the LEDs, the slave diagnosis and the diagnostic
options in STEP 7 .
Interrupt Evaluation
To help you evaluate the interrupts of the ET 200S, we will examine the difference
between these and the interrupts of the S7/M7 DP master and other DP masters.
Chapter Overview
In
Section
4.1 Configuring the IM 151/CPU
4.2 Resetting the Memory of the IM 151/CPU
4.3 Commissioning and Startup of the ET 200S
4.4 Diagnostics Using LEDs
4.5 Diagnostics via the Diagnostic Address with STEP 7
4.6 Slave Diagnosis
4.7 System Status List (SSL)
ET 200S Interface Module IM 151/CPU
A5E00058783-01
Contents
4
Page
4-2
4-4
4-7
4-9
4-11
4-14
4-24
4-1