Advertisement
Faultfinding.
The EH0152 has a tilt switch which disconnects the power if the heater falls
over. If the heater is not operating, restore it to an upright position.
The EH0152 has an overheat protection switch, which disconnects the power
if the element gets too hot. The usual reason for this is because the air-flow
has been obstructed, or the grilles have been blocked. If the heater ceases to
operate, leave it for 20 minutes to cool down, then check that the grilles are
not being obstructed.
Turn the switch to the "cold air" setting, and reconnect to the mains supply. If
the fan operates, then it is safe to select the "warm air" or "hot air" settings. If
the fan does not operate, or overheat protection switch operates again,
contact an authorised service agent for repair.
PAT TESTING.
When used in a workplace, this product must be safety-tested yearly by a
qualified electrician (PAT Tested) in order to comply with the Electricity at
Work Regulations.
We recommend that it is PAT tested regularly when used in a domestic
environment.
Advertisement
