Advertisement

EH0287
2 kW 9-Fin Oil-Filled Radiator
3 Heat settings
Adjustable thermostat
Built-in carrying handle
Durable Castors
Safety overload cut-out
Page 1

Advertisement

Table of Contents
loading

Summary of Contents for Prem-I-Air EH0287

  • Page 1 EH0287 2 kW 9-Fin Oil-Filled Radiator 3 Heat settings Adjustable thermostat Built-in carrying handle Durable Castors Safety overload cut-out Page 1...
  • Page 2: Installation

    IMPORTANT Installer and Users please note: These instructions should be read carefully and left with the user of the product for future reference. INSTALLATION Attaching the feet. Turn the appliance upside down and place on a flat surface. Hook the U-shaped brackets between the first and second fins (from each end).
  • Page 3: Operation

    OPERATION Plug the mains lead into a 13 Amp mains socket. If connecting via an extension lead, make sure that the lead is rated at 13 Amps or more, and that it is fully unwound. Switch the appliance on at the mains socket. Use the two power control switches on the side to select the required operation: •...
  • Page 4: Product Safety

    PRODUCT SAFETY • This appliance is not intended for use by persons (including children) with reduced physical, sensory mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. •...
  • Page 5: Pat Testing

    PAT TESTING When used in an office environment, this product must be safety-tested yearly by a qualified electrician (PAT Tested) in order to comply with the Electricity at Work Regulations. We recommend that it is PAT tested regularly when used in a domestic environment.
  • Page 6 If the mains lead is damaged, it must be replaced by the manufacturer or and authorised service centre. If the mains plug needs to be replaced, proceed as follows: • Connect the brown wire to the terminal labelled "L". • Connect the blue wire to the terminal labelled "N".
  • Page 7: Fault Finding

    FAULT-FINDING If the appliance is not operating, proceed as follows: Check that the mains plug is firmly in the socket, and that the socket is switched ON. Check that at least one of the power control switches is switched ON. The appliance also has a overload protection device to prevent overheating.
  • Page 8: Technical Specification

    Operating current: 8.7 A SERVICE WARRANTY Prem-i-Air guarantees the product free from defects in materials and workmanship for a period of twelve months. Should this appliance be operated under conditions other than those recommended, at voltages other than the voltage...

Table of Contents