Fault Finding; Disposal And Recycling; Technical Specification - Prem-I-Air EH1566 Manual

The EH1566 has an overheat protection switch, which disconnects the power if
the element gets too hot. The usual reason for this is because the air-flow has
been obstructed. If the heater ceases to operate, leave it for 20 minutes to cool
down, then check that the grilles are not being obstructed.
Switch back on, and check that the unit is operating normally. If not, contact an
authorised service agent for repair.
You must not dispose of this appliance with domestic household waste.
Most local authorities have specific collection system for appliances and disposal
is free of charge to the end-user.
When replacing an existing appliance with a similar new appliance your retailer
may take the old appliance for disposal.
Dimensions (wall mounting):
Weight:
Power supply:
Power consumption:
Operating current:
IP Rating
FAULT-FINDING

DISPOSAL AND RECYCLING

TECHNICAL SPECIFICATION

280×112×250 mm
0.96 kg
230 V AC
400 W
1.73 A
IP20
5