Panasonic DMR-HS2 Operating Instructions Manual page 61

Tabs
Video Seamless Play
Turn seamless play on or off on discs with play lists.
≥Seamless Play does not effect programs that have been
recorded with LPCM sound.
Dubbing Aspect
You may set the aspect ratio for a picture to be viewed on a
4:3 television. Setting information is shown on the recording
drive (Setting cannot be made in High Speed mode).
Audio during Search [HDD] [RAM] [DVD-R] [DVD-V] [VCD]
Audio
Choose whether to have sound during the first level of fast-forward.
D. Range Compression [DVD-V] (Dolby Digital only)
Change the dynamic range for late night viewing.
Select MTS for DVD-R or LPCM ( page 30)
Select whether to record the main or secondary audio type
(SAP) when recording to DVD-R or when recording using
LPCM sound ("Audio Mode for XP Recording"
Select Dubbing Audio to DVD-RAM
You can select the kind of sound when dubbing to DVD-RAM.
Select Audio CH for DV input ( page 63)
You can select the kind of sound when recording from the
unit's DV terminal.
Audio Mode for XP Recording
Choose the audio type when recording with XP mode.
≥Sound recordings made using LPCM require more information
than usual. Consequently the picture quality of LPCM record-
ings may be less than that of normal XP mode recordings.
Digital Audio Output ( page 62)
PCM Down Conversion
Dolby Digital
DTS
Display
Status Messages
Choose whether to show on-screen messages automatically.
Language of Display Message
Choose the language for these menus and the on-screen
messages.
Blue Background
Select "Off" if you do not want to have the unit show the blue
background when reception is weak.
FL Display
Changes the brightness of the unit's display.
TV TV Aspect ( page 16)
Screen Choose the setting to suit your television.
TV Type ( page 16)
Choose "480P" to enable progressive output.
4:3 TV Settings for DVD-Video
Select how DVD-Video widescreen picture is shown on a 4:3
standard aspect television.
4:3 TV Settings for DVD-RAM
Select how DVD-RAM widescreen picture is shown on a 4:3
standard aspect television.
Menus
below).
Options
≥On: The scenes in play lists are played seamlessly. This may
cause shifting of the points where scenes change. Some
play lists cannot be played seamlessly.
≥Off: The points where scenes in play lists change are played
accurately, but the picture may freeze for a moment.
≥Squeeze: Full screen display
The picture will appear stretched in the vertical plane.
≥Letterbox: A black bands will appear across the top and bottom
of the screen display.
≥On ≥Off
≥On ≥Off
≥Main ≥SAP
≥Main + SAP ≥Main
(Available in all modes apart from High Speed mode when dub-
bing programs.)
≥Stereo 1 ≥Stereo 2
≥Dolby Digital ( page 66)
≥On ≥Off
≥Bitstream ≥PCM
≥Bitstream ≥Off
≥Automatic ≥Off
≥English ≥Français
≥On ≥Off
≥Bright ≥Dim
≥Dim during Play: The display dims during play and when
the unit is turned off.
≥Automatic: The display dims during play and goes off
completely when the unit is turned off (the power
consumed will be 0.6 W). If you press a button the
display will brighten briefly.
≥4:3 ≥16:9
≥480I ≥480P
≥Pan & Scan ( page 66):
Video recorded for a widescreen is played as Pan &
Scan (unless prohibited by the producer of the disc).
≥Letterbox ( page 66):
Video recorded for a widescreen is played in the letterbox style.
≥4:3:
Programs played as recorded.
≥Pan & Scan: Video recorded for a widescreen is played
as Pan & Scan.
≥Letterbox:
Video recorded for a widescreen is played in the
letterbox style.
!?
≥SAP
≥Mix
≥LPCM ( page 66)
!?
!?
!?
!?
!?
61
RQT6570