Tools Needed; Materials Needed - Bosch SHE660 Installation Instructions Manual

Tools and Materials Needed
TOOLS NEEDED
Hammer
Tape Measu re
Wire Cutter
Hob Saw Adjustabb Wrench
Sbt Screwdriver
Wire Stripper
PhHHpsScrewdriver
DrHI _- Z i
%20 Screwdriver
Level
MATERIALS NEEDED
(Additional materiab may be required to comply with bcal codes,)
Ebctrbal Supply CaNe - Minimum #14 AWG, 2 conductor, 1 ground, insulated copper
conductors rated 75°C or higher,
_> Hot Water Supply Line - Minimum 3/8" O,D, copper tubing or metal braided dishwasher
...... "_* s {_: ....... supply line,
5 @}s Shut-off valve and fittings appropriate for hot water supply line (copper tubing/
compression fitting, or braided hose),
90 ° elbow with 3/8" N, P,T, male threads on one leg, and sized to fit your water supply
<c_ ...... ..... ;._" ,_> line (copper tubing/compression fitting, or braided hose) on the other leg,
:_;: Teflon tape or other pipe thread compound to seal plumbing connections,
UL listed conduit connector or strain relief,
2