Exact Sequence Of Response Characters - HP 82718A Expansion Pod Reference Manual

•
• if
A
HP 8271 8A Errors and Responses
ABORT
Spontaneous response
The modem has aborted a command string without executing it because of
an error or because it contained a
.a$
(backspace-ASCII 8 or control-H)
or
~A~
(cancel-ASCII 24 or control-X).
B BAD ANS
A (ANSWER), D (DIAL), M (MODEM), 0 (ORIGINATE), R (REDIAL)
• A: In MODEM mode only, the modem detected a tone not in the
origina te band.
• 0, R: In MODEM mode only, the modem detected either a tone not in
the answer band or a dial tone after dialing.
• M, 0: The modem detected either a tone not in the answer band or a
dial tone after dialing.
OV OV
Spontaneous response
The modem receive buffer has overflowed.
EXACT SEQUENCE OF RESPONSE CHARACTERS
Below are listed the exact sequence of characters reported by the modem when the different responses
occur. The following symbols are used:
~t1
(command character),
~R
(carriage return),
,~f'
(line feed), and
11111
(space). The spaces between symbols areio improve readability-=any spaces reported in the response
are
shown with
m' .
ABORT
After all commands except T 3 through T F:
Long: \
CR tt: CM
A BORT
cRtf'".
(j~ OK p~ i~t
Short: \
fRbf f~ A f~
:bf fM
4
After T 3:
Long:
CRLF
CM
ABORT CR
IF OM
OK
tR'f:
Short:
GRLF
CM A CR
IF
CM 4
After T 4 through T F:
113