Advertisement
14
en | Initial installation and configuration
3.
2.5
Enabling TRS
To enable TRS:
4
P
2.6
Restarting the server
To restart the server:
4
P
2020.08 | V2 | DOC
In the 'serviceHost' field, edit the host name.
Usually, only the field 'serviceHost' needs to be edited.
If DNS is configured, it is recommended to use the FQDN. If this is not the case, the
addressing takes place via IP.
On the shell, type the following (enter root user password, if required):
sudo systemctl enable trs
During the first TRS start after restarting the server, a self-signed default server
certificate with serviceHostName as common name is created once.
On the shell, type the following (enter root user password, if required):
sudo reboot
The restart of the server applies udev rules and starts TRS service automatically.
Quick installation guide
DL380 Gen 10 AI Server
Bosch Security Systems B.V.
Advertisement
