Table of Contents
Advertisement
Cleaning & Maintenance
Daily:
•
Check the drip tray and empty if necessary.
Quarterly:
•
Inspect all fittings and hoses for leaks.
•
Inspect inside of tank for lime deposits. De-lime tank and probes if necessary.
(This procedure should be performed by a qualified service technician)
Notice:
•
Turn off power before any cleaning procedure, including wiping the exterior for appearance
reasons. Dry the exterior, especially the face panel, before turning on power.
WARNING:
•
Equipment is designed for commercial use , equipment is not for household use
•
Do not apply any type of spray cleaner on the face panel of this equipment.
•
Never use solvent or solvent based cleaner or petroleum based polish on this equipment.
•
Dry the face of the HWD-2102 before turning on power.
•
No user serviceable parts, refer to qualified service technician for repair and adjustments.
•
Dangerous high voltage and high temperatures inside
•
WARNING-Do not plug-in this equipment or attempt to operate without all covers in place
and all screws fastened.
Follow the cover reassembly sequence:
First: Lower face cover
Second: Upper face cover
Third : Top cover
This is noted and illustrated in more detail in section for qualified service technicians
•
Unplug machine before disassembly or changing settings
The following pages contain repair and adjustment information for qualified service technicians
4
Advertisement
Table of Contents
