Greenheck DFD Series Installation, Operation And Maintenance Manual page 76

Wiring Diagram for Wall Switch Sensor Override
CUSTOMER
WALL SWITCH
RED WIRE
L1 SWITCHED POWER
BLACK WIRE
L2 CONSTANT POWER
GREEN WIRE
GROUND (EARTH)
WHITE WIRE
NEUTRAL WIRE
1 L1 Switched Power: Red Wire - Customer connection for switched power to the fan
2. L2 Constant Power: Black Wire - Provides customer connection for constant power to
3. L3 Neutral Power: White Wire - Provides customer connection for neutral power to the
4. Green Wire: Provides earth ground for customer connection.
Our Commitment
As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications
without notice.
Product warranties can be found online at Greenheck.com, either on the specific product page or in the literature
section of the website at Greenheck.com/Resources/Library/Literature.
Greenheck's Centrifugal Ceiling Exhaust and Inline Cabinet
Fans catalog provides additional information describing the
equipment, fan performance, available accessories, and
specification data.
®
Phone: 715.359.6171 • Fax: 715.355.2399 • Parts: 800.355.5354 • E-mail: gfcinfo@greenheck.com • Website: www.greenheck.com
4 483548 • Sensors for Model SP Fans, Rev. 2, November 2019
JUNCTION BOX
CUSTOMER SUPPLIED
motor for high speed to be landed in lever nut connector.
the motion sensor.
fan motor.
BLACK WIRE
GREEN WIRE
WHITE WIRE
BLACK WIRE
RED WIRE
WHITE WIRE
AMCA Publication 410-96, Safety Practices for Users and
Installers of Industrial and Commercial Fans, provides
additional safety information. This publication can be obtained
from AMCA International, Inc. at www.amca.org.
Copyright 2019 © Greenheck Fan Corporation
FAN
FAN
BLACK WIRE
GREEN WIRE
WHITE WIRE
ACC
BLACK WIRE
OPTIONAL SENSOR:
MOTION
RED WIRE
HUMIDITY, or
MOTION & HUMIDITY
WHITE WIRE