Cisco Firepower 4100 Series Manual page 3

Overview
Feature
Network ports
SFP ports
Pullout asset card
Grounding lug
Locator beacon
Power switch
Network modules
Supported network
modules
AC power supply
DC power supply
Redundant power
Fan
Storage
MSP
4110 4120
Eight fixed 1-Gb and 10-Gb SFP ports (named Ethernet 1/1 through 1/8)
Eight fixed 1-Gb and 10-Gb SFP ports
Displays the serial number; on the front panel
On rear panel
On front panel
On rear panel
Two network module slots (named network module 2 and network module 3)
• 8-port 10-Gigabit Ethernet SFP+
• 4-port 40-Gigabit Ethernet QSFP+
• 8-port 1-Gigabit Ethernet copper with hardware bypass
• 2-port 40-Gigabit Ethernet QSFP+ (built-in) with hardware bypass
• 6-port 1-Gigabit Ethernet SX fiber SFP+ (built-in) with hardware bypass
• 6-port 10-Gigabit Ethernet SR fiber SFP+ (built-in) with hardware bypass
• 6-port 10-Gigabit Ethernet LR fiber SFP+ (built-in) with hardware bypass
Two (1+1) power supply module slots
Ships with one 400-W AC power supply
modules
Hot-swappable
No
Yes 1+1
Six fan module slots
3+1 redundancy
Hot-swappable
Two SSD slots (200 GB)
Ships with one SSD installed in slot 1.
Note RAID is not supported.
Slot 2 is reserved for the Malware Storage
Pack (MSP).
Installed in the second SSD slot only
4140 4150
Two (1+1) power supply module slots
Ships with two 400-W AC power supply
modules
Hot-swappable
Yes (optional)
Two SSD slots (400 GB)
Ships with one SSD installed in slot 1.
RAID is not supported.
Note
Slot 2 is reserved for the MSP.
Overview
Features
3