Table of Contents
Advertisement
Checking
or changing
cooking
time or Cook Power settings
To double
check
settings:
1. Touch the command
pads for the settings you want to check. The cooking
time or Cook
Power settings you touched
in for those pads will show in the Display.
2. Touch START to start the oven or to return the Display
to show what the oven is doing,
To change
the cooking
times during
operation:
I. Touch CHANGE/CANCEL
Pad once. The oven will go off and the Display
will show a
colon. Touch in the new cooking
time, then touch START. The oven will continue
cooking
for the new time.
To change
Cook Powers during
operation:
I. Touch COOK POWER Pad once, The Display
will show the Cook Power for the Cook Cycle
in operation.
Touch in the new Cook Power, then touch START. The oven will use the new
Cook Power for the rest of the Cook Cycle.
Cooking with the TEMPERATURE
PROBE
followed by KEEP WARM
The Temperature
Probe helps take the guesswork
out of cooking
roasts and casseroles.
The probe
is designed
to turn off the oven when it senses the temperature
you set. See
page18
for helpful
information
on cooking
differenttypes
of food.
After the food reaches
the temperature
you set, the oven will automatically
go into a
Keep Warm cycle. This allows you to keep food warm for up to 60 minutes. KEEP WARM
will only operate
if the Temperature
Probe is used in the last Cook Cycle.
If will
continue
to operate
for 60 minutes
or until if has been cancelled.
Do not hold food for more than an hour. The qualify
of the food will suffer with
extended
time.
DO THIS...
1.
Insert at least YZ of the
temperature
probe
into
the food.
DO THIS...
4.
Touch PROBE TEMP.
2. Place food in the oven
and plug the probe
plug
into the socket on the back
oven wall.
THIS HAPPENS...
3.
Make sure the probe
cable
does not touch
any part of the oven
inferior.
Damage
to
the probe
or oven could
result. Close the door.
The COOK1 Signal Light will come
on and the Display
will show an 'I"
Advertisement
Table of Contents
