Whirlpool MW3500XM Use And Care Manual page 14

m
10. Touch START.
d
count
own
d
count
own
BEEP
BEEP
BEEP
The Display will show what you
touched. This example shows 70%
of full power.
When you touch START, both COOK
1 & 2 Signal Lights come on to show
you that the oven is cooking in the
first of two Cook Cycles. The Cook
Power Signal Light will go off. The
oven will cook in the Cook Power
you selected.
The Display will count down the
time to show you how much time is
left in the first Cook Cycle.
When the Cook 1 cycle ends, you
will hear a beep and the oven will
automatically start cooking in the
Cook 2 cycle.
The COOK1 Signal Light will go off
and the COOK 2 Signal Light will
stay on.
The Display counts down the time
to show you how much time is left in
the Cook 2 cycle.
When the Cook 2 cycle ends, you
will hear 3 beeps. When the beep-
ing stops, the Display will show
the time of day.
For best cooking results, remember to provide a standing time after defrosting
in Cook Cycle 1 and before cooking in Cook Cycle 2.
14