Panasonic FZ-G1 Series Supplementary Instructions Manual page 4

Addendum
Preparation
Ÿ Remove the AC adaptor.
Ÿ Take out the stylus pen from the leather cover beforehand.
Ÿ Place the computer on a soft cloth with the panel side down.
Ÿ Make sure that there is no item under the computer.
A Remove the edge (A) of hand strap passing through the clip. (The illustra-
tion shows the top side of hand strap as an example.)
B Tip the clip (B) back to pull it out of the computer. (Do the same for the bot-
tom side of hand strap.)
C Put the front leather cover on the body of the computer.
Ÿ Correctly orient the front leather cover to the computer checking the posi-
tion of the power terminal (A) as a guideline.
Ÿ Attach the leather cover so it can cover the corner guard of the body.
NOTE
l Attach the case in the correct direction so
that the front camera is not hidden.
D Flip up the strap and attach the backside leather cover.
Ÿ Securely attach the Velcro straps of the front leather cover and backside
leather cover.
E Adjust the clasp position of the strap (a) and paste the bonded part (b).
4
b
a
b
a