5.2
How to Use the FB Library
The FBs in the imported FB library can be used by selecting an applicable FB in the "Element Selection" window and dragging
and dropping it to the program editor. After the FB is pasted, create an input ladder and an output ladder of the pasted FB, and
complete a program.
Insert FB input circuits to the left side and output circuits to the right side of the ladder window in the same manner as
standard ladder programs.
1.
To display the FB list, click the [Library] [INVERTER-CC-IEF-Basic_F] [FB] [MELSOFT_FBFILE] in the "Element
Selection" window. Select an FB to be used, and drop it in the program editor. When the "FB Instance Name" window
appears, click the [OK] button.
2.
The FB is pasted to the program editor.
5 EXAMPLE PROGRAMS
5.2 How to Use the FB Library
5
34