Communication Settings Of Gx Works3 - Mitsubishi Electric MELSEC iQ-F Series Quick Connection Manual

3.6

Communication Settings of GX Works3

This section describes the communication settings of GX Works3. Directly connect an Ethernet port of the personal computer
where GX Works3 has been installed to the FX5U CPU module as shown below. To write data to the FX5U CPU module, a
communication test needs to be performed first.
1.
Select [Online]  [Current Connection Destination].
2.
Select "Direct Coupled Setting".
FX5U CPU module
Ethernet
3 PROGRAMMABLE CONTROLLER SETTINGS
3.6 Communication Settings of GX Works3
3
28