Panasonic CF-Y2 Series Reference Manual page 52

Security Measures
Setting the User Password (enabling, changing, disabling)
User Password is set when several people will be using this computer.
For example, the system administrator sets the Supervisor Password and the User
Password, and only advises the other users of the User Password. In this way, other users
can be restricted from changing the Setup Utility.
NOTE
When the Supervisor Password has not been set, the User Password cannot be set.
Set the Supervisor Password if you have not done so (
To disable the User Password, start up the Setup Utility with the Supervisor Password
1
Run the Setup Utility. (
2
Using either the
3
Using either the
Enter
press the
4
Only when the User Password has been set:
Enter your password at [Enter Current Password] and press the
Enter
key.
5
Enter your password at [Enter New Password] and press the
key.
To disable the User Password
Press only the Enter key
page 147)
key or the key, select [Security].
key or the key, select [Set User Password] and
key.
52
page 50)
Enter