Panasonic CF-Y2 Series Reference Manual page 45

Standby/Hibernation Functions
Using the Power Switch
• Connecting or disconnecting the AC adaptor
• Closing or opening the display
<CF-Y2 series>
• Sliding the drive power/open switch
<CF-W2 series>
• Sliding the open lever
It may take one or two minutes to enter standby or hibernation mode
In standby or hibernation mode
Do not insert or remove peripherals; abnormal operation may result
In standby mode, power is consumed. If PC Cards are inserted, more power is consumed.
When all power has been consumed, all data saved at standby is lost since it is retained in
memory. We therefore recommend plugging in the AC adaptor when using the standby
function
Setting
1
Click [start] - [Control Panel] - [Performance and Maintenance] -
[Power Options] - [Advanced].
2
Click [Stand by] or [Hibernate] for [When I press the power button on
my computer], and then click [OK].
Entering the standby or hibernation mode
1
Slide the power switch (A); release your finger at the beep
The computer will enter either the standby or hibernation mode, depending on the
setting.
45
*1
sound.