Technical Specifications 28; 91 Ce Declaration And Requirements - Sunrise Medical Quickie Puma 20 User Manual

28 Technical specifications
9 Technical specifications
9.1 CE declaration and requirements
This product complies with the COUNCIL DIRECTIVE 93/42/EEC of 14 June 1993
concerning medical devices. The product also meets the following requirements and standards. This
has been verified by independent test organizations.
Standard Definition/description
Requirements as stated in Appendix 1 apply
EU guideline Sunrise Medical declares under its sole responsibility that this
93/42 EEC
product is in conformity with the requirements of the directive
93/42/EEC amended by 2007/47/EEC.
The EN 12182 requirements as stated in NEN-EN 12184 (2009):
NEN-EN 12182
Technical aids for disabled persons - General requirements and
test methods October 1999
NEN-EN 12184
Electrically powered wheelchairs, scooters and their chargers -
(2009)
Requirements and test methods October 2009
Class B
Requirements and test methods for impact, static and fatigue
ISO 7176-8
strengths July 1998
ISO 7176-9 Climatic tests for electric wheelchairs IPX4
Requirements and test methods for power and control systems
ISO 7176-14
for electrically powered wheelchairs 1997
The Puma 20 meets the crash test requirements as described in
ISO 7176-19 ISO 7176-19 (2008)
(2008) Sunrise Medical declares that this product fulfils the performance
requirements for a "Crash Test" to ISO 7176-19.
9.2 Technical information
The electric wiring diagram varies according to the type of controller used (
Batteries
Maximum battery dimensions
Battery capacity
Maximum permissible charging
voltage
Maximum charging current
Connector type
Insulation
Max.
260 x 172 x 210
(10.25 x 6.75 x 8.25)
40 / 60 / 74 GEL, 50 AGM
24
12
&
Controller
Class 2 double insulated
Puma 20
Test dummy
weight
n/a
136 kg
(21.4 lbs.)
136 kg
(21.4 lbs.)
n/a
n/a
n/a
77 kg
(11.8 lbs.)
&
Controller).
Unit
mm
inch
Ah
V
A (rms)