Indicating Fault List - Siemens FT2010 Operation Manual

6.7.2 Indicating fault list

Building Technologies
Fire Safety
If a 'Fault' has occurred and is the only 'Event' in the configured ↑ visibility, this
'Event' is shown on the display directly.
If other 'Events' or conditions have occurred, such as 'Isolation' or an 'ALARM', the
most important 'Event', or the most important condition, respectively, is indicated
on the display.
Indication of the fault list
ϖ A button is configured with the 'Show' 'Fault' function
ϖ The button is labelled accordingly
Press <'Show' 'Fault'>.
κ
 The fault list is indicated on the display.
Example for a fault list with two 'Faults':
002 Faults
Device missing
Office Room 123
Dev.location fault
Corridor 3rd floor
–––– ––––––––––––––––––––––––––––––––
––
Table 2: Example of fault list
See also
1 Maximum number of events that can be displayed [➙ 14]
Operation
Indicating and scrolling in lists
Zone
Zone
––––––––––––––––––––––––––
6
1/1
3/1
–––
–
25 | 40
009310_l_en_--
2018-08-29