Sony Aiwa CX-JD5 Service Manual page 27

Table of Contents

Advertisement

2-7. Disc Check Memory
Disc Check Memory
1. SL Disc check
2. SL Disc check
3. SL Disc check
On this screen, measure the mirror time of chucked disc, and write
to the EEPROM.
2-8. Error Rate Display
Error Rate Display
UC
PI1 Err Now xx xxxx xxxxxxxx
Max xx xxxx xxxxxxxx
Avg xx xxxx
PI2 Err Now xx xxxx xxxxxxxx
Max xx xxxx xxxxxxxx
Avg xx xxxx
PO
Err Now xx xxxx xxxxxxxx
Max xx xxxx xxxxxxxx
Avg xx xxxx
On this screen, measure and display the error rate.
UC : Incorrect value
CR : Correct value
Add : Address
2-9. SACD Water Mark Check
SACD Water Mark Check
PSP AMP
PSN
Start: ENTER
On this screen, measure the PSP AMP value and PSN value of SACD
water mark.
Exit: RETURN
CR Address
Exit: RETURN
Exit: RETURN
3. MECHA AGING
On the Test Mode Menu screen, selecting
the mechanism deck.
### Aging Test MENU ###
** Pls use over 40 min.CD **
Operation Menu
1. Open/Close Test
1)
Set over-40-min. CDs in Disc 1 to 3.
2)
On the Aging Test MENU screen, press the
remote commander to display the Open/Close Test screen.
3)
Insert discs and press the
commander.
4)
Is starts the aging.
During aging, the disc number, operating status and repeat cycle
are displayed. Aging can be aborted at any time by pressing
[RETURN]
the
key. After the operation is stopped, press the
[RETURN]
key to return to the Aging Test MENU.
CX-JD5
[3]
executes the aging of
Exit: RETURN
[1]
key on the
[ENTER]
key on the remote
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents