Table of Contents
Advertisement
[HOT RESET]
• The hot reset clears data except BUCKUP stored in the RAM.
Procedure:
[ENTER]
1. Press
button,
X
simultaneously.
2. The fluorescent indicator tube becomes blank for a while, and
the set is reset.
[TUNER STEP CHANGE]
• The step interval of AM channels can be toggled between 9 kHz
and 10 kHz.
Procedure:
[POWER]
1. Press
button to turn the set ON.
[TUNER/BAND]
2. Press
button to select the "AM".
[POWER]
3. Press
button to turn the set OFF.
[ENTER]
4. Press
button and
The system will turn ON automatically. The message "AM 9k
STEP" or AM 10k STEP" appears and thus the channel step is
changed.
[DVD REPEAT 5 LIMIT OFF MODE]
• The number of repeat for DVD playback is 5 times when the
repeat mode is "REPEAT ALL". This mode enables DVD to
repeat playback for limitless times.
Procedure:
[POWER]
1. Press
button to turn the set ON.
2. Select DVD function.
[ENTER]
3. Press
button,
X
simultaneously to enter the DVD repeat 5 limit off mode.
4. To release this mode, operate the cold reset. (Refer to the "MC
COLD RESET")
[DVD SHIP MODE (LOCK)]
• This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
[POWER]
1. Press
button to turn the set ON.
2. Select DVD function.
[DVD]
[POWER]
3. Press
button and
set will power off automatically.
4. After the "SEE YOU" blinking display finish, a message
"LOCK" is displayed on the fluorescent indicator tube and the
DVD ship mode is set.
[DVD POWER MANAGE]
• This mode let you switch on or off power supply to the BU
during TUNER function.
• When DVD POWER is set to OFF, the power supply to the BU
is cut off during TUNER function. It will increase the time taken
to access DVD when function change from TUNER to DVD
but it will improve tuner reception.
• When DVD POWER is set to ON, the power supply to the BU
is not cut off during TUNER function. It will reduce the time
taken to access DVD when function change from TUNER to
DVD but it will decrease tuner reception performance.
Procedure:
[POWER]
1. Press
button to turn the set ON.
2. Select DVD function.
[POWER]
3. Press
button to turn the set OFF.
[POWER]
4. Press
x
button,
power on automatically.
5. The message "DVD POWER" will be displayed on the
fluorescent indicator tube.
[DISC1]
button, and
button
[POWER]
button simultaneously.
[DVD]
button, and
button
button simultaneously. The
button simultaneously. The set will
[DVD COLOR SYSTEM CHANGE OVER]
• The color system can be changed over NTSC or PAL.
Procedure:
[POWER]
1. Press
button to turn the set ON.
2. Select DVD function.
[POWER]
3. Press
button to turn the set OFF.
[POWER]
4. Press
button,
X
power on automatically.
5. The message "COLOR PAL" or "COLOR NTSC" will be
displayed on the fluorescent indicator tube. The color system is
changed over.
[DVD TRAY LOCK MODE]
• This mode let you lock the disc trays. When this mode is acti-
vated, the disc tray will not open when
[DISC CHANGE]
or
button is pressed. The message "LOCKED"
will be displayed in the will be displayed on the fluorescent
indicator tube.
Procedure:
[POWER]
1. Press
button, to turn the set ON.
2. Select DVD function.
3. Press
x
button and
Z OPEN/CLOSE
and hold down until "LOCKED" or "UNLOCKED" displayed
on the fluorescent indicator tube (around 5 seconds).
[MD/VIDEO SWITCHING]
• This mode let you switch from MD to VIDEO and vice-versa.
Procedure:
[POWER]
1. Press
button, to turn the set ON.
2. Select MD function.
[VIDEO/AUX]
[POWER]
3. Press
and
The function will change to VIDEO. Press the same buttons
again to change from VIDEO to MD.
[DVD TEST MODE GENERAL DESCRIPTION]
The Test Mode allows you to make diagnosis and adjustment easily
using the remote commander and monitor TV. The instructions,
diagnostic results, etc. are given on the on-screen display (OSD).
[STARTING DVD TEST MODE]
[POWER]
1. Press the
button to turn the power on.
2. Select the function "DVD".
[POWER]
3. Press the
button to turn the power off.
4. Press two buttons of
x
and
1 second simultaneously, and
wise.
5. It displays "SERVICE IN" on the fluorescent indicator tube,
and displays the Test Mode Menu on the monitor screen as
follows. (At the bottom of the menu screen, the model name
and revision number are displayed)
Test Mode Menu
0. Syscon Diagnosis
1. Drive Auto Adjustment
2. Drive Manual Operation
3. Mecha Aging
4. Emergency History
5. Mecha Error History
6. Version Information
7. Video Level Adjustment
Model
:JAX-Dxxxx
Revision :x.xx
6.
To execute each function, select the desired menu and press its
number on the remote commander (RM-Z20013).
7.
To release from test mode, press the
the power off.
CX-JD5
button simultaneously. The set will
Z OPEN/CLOSE
button
button, simultaneously
button simultaneously.
Z OPEN/CLOSE
for more than
[VOLUME]
knob is turned clock-
Exit: POWER Key
[POWER]
button and turn
21
Hide quick links:
Advertisement
Chapters
Table of Contents
