To Add A Dish After Starting - Whirlpool DU1098XR Series Use & Care Manual

WASH Cycle
A double wash for normal to heav-
ily soiled loads. [The Energy Guide
Label data is based on this cycle.)
Cycle time is about 60 minutes.
HEAT DRY or AIR DRY?
if the
HEAT DRY Optlon
is selected air in the
dishwasher is heated during the "dry" part of
the cycle.
If the
AIR DRY Oplion
is selected, air in the
dishwasher is not heated. The Cycle Control
Knob will keep moving clockwise until the "dry"
part of the cycle is complete.
Using the AIR DRY Option helps save energy,
but dishes take longer to dry (overnight) and
some water spottlng may result. Some items
(such as piasttcs) may need towel drying.
For best results. use a solid rinse aid.
To add a dish after starting
1. To be sure the added item is washed and
rinsed, make sure the Cycle Control Knob
has not passed WASH.
2. Unlatch the doorto stop the cycle.
3. Open the door and add the dish.
4. Close the door. Do
not
latch it. Wait 30 sec-
onds for air in the dishwasher to warm up.
This helps reduce the amount of moisture
that can come from the vent when restart-
ing the cycle.
5. Latch the door. The dishwasher will start
from where it stopped.
9