Setting The Controls; Selecting A Wash Cycle - Whirlpool 940 SERIES Use And Care Manual

Setting the Controls

Operating your dishwasher's controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.

Selecting a wash cycle

Press a Cycle pad. The dishwasher starts filling once you press a Cycle pad unless you
select the delay wash cycle. You may press Option pads as the machine is filling.
CYCLE
RINSE/WASH LATER
For rinsing a few items to
be washed one or more
RINSE
days later.
WASH
•
Do not use detergent.
LATER
• Water is not heated
during Rinse/Wash Later.
•
Air Dry is automatically selected.
LOW ENERGY/CHINA
Single wash for prerinsed
or lightly soiled loads.
LOW
•
Select High Temp Wash
ENERGY
to heat water in the main
CHINA
wash.
•
The water heats to 140°F (60°C) in
the final rinse.
NORMAL
Double wash for normal,
everyday soiled loads.
(The Energy Guide label
NORMAL
is based on this cycle.)
• Select High Temp Wash
to heat water in the main wash.
• The water heats to 140°F (60°C) in
the final rinse.
†
Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher.
The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown.
A "•" shows what each cycle includes
MAIN
WASH RINSE WASH
•
• •
FINAL
RINSE RINSE DRY
• •
•
• •
• • •
continued on next page
CYCLE
TIME
(Minutes)
12
†
60
†
66
13