Table Of Contents; Starting Your Dishwasher - Whirlpool 8900 Series Use And Care Manual

mIm:l~mg
0 l D
1
.
Using Your Dishwasher
In This Section
Page
Page
Before starting your dishwasher ...... .
What happens in each option.. ...... ..I 0
Starting your dishwasher ................. .6
The signal lights ............................... 11
Starting your dishwasher using Using the detergent dispenser.. .... ..I 2
delay wash .......................................... 7
Adding a dish during a cycle..
.7
Using the rfnse agent dispenser.. .. .13
..........
.......................... 14
Changing a cycle setting .................. .8
Quiet operating tips
................... .15
Changing an option
Water temperature tips
............................ 8
Canceling a cycle
8
Energy saving tips ............................ 15
...............................
Special tips on dishwasher use.. .. ..16
Cycle selection chart .......................... 8
Operating your dishwasher properly enables you to obtain the best possible results. This
section explains proper dishwasher operation.
Before starting your dishwasher
1. Properly load the top rack, bot-
tom rack, and the silverware bas-
ket. See pages 17-20.
4. Checkthe rinse agent dispenser.
See pages 13 and 14.
2. Spin both spray arms with both
racks in place to make sure noth-
ing prevents arms from turning
freely.
3. Add detergent. See pages 12
and 13.
5. Push door firmly when closing
and it will automatically latch.
6. Run hot water at sink nearest
dishwasher until water is hot.
Turn off water.
Starting your dishwasher
The dishwasher will wash and dry dishware according to the selections you make on the
control panel.
1.
Push a Cycle Selector button for the
desired cycle. The indicator above the
button will show red for the selected cycle.
NOTE:
Normal Wash and Light Wash
cycles share the same button. The Cycle
Control knob determines which cycle
operates.
6