Component Locations - Honeywell Fusion4 MSC-L Installation & Operation Manual

3.6.1.2.2 Component Locations

FIGURE 3-19
3- 30
System Description - PCB Layout
CAN-ARM-MSC component locations
Item
Description
reference
CN1, CN2 Connectors for interfacing with the ARM1-BACKPLANE-MSC or
ARM2-BACKPLANE-MSC.
CN3 Programming connector for U56 (ARM controller).
CN4 Programming connector for U46 (PI processor -Cortex M0).
JP7 2-wire RS-485 communication interface
JP8 2-wire RS-485 communication interface
Fusion4 MSC-L
Installation & Operation Manual
Part No.: 4418309_Rev09
Honeywell