Honeywell Fusion4 MSC-L Installation & Operation Manual page 488

5 - 300
Operation - Truck Driver Operations
Click Cancel to terminate the operation.

5.22 Truck Driver Operations
5.22.1 Overview
A truck driver can perform loading operations by navigating through the
various screens designed for truck loading. FIGURE 5-45 provides an
overview of the truck loading operations.
NOTE: The screens displayed in grey are optional.
The vehicle authorization prompts can be enabled or disabled from the
workflow options on the device configuration menus. The permissive
connect screens appear only if the respective I/O bindings are
configured on the Bay I/O Bindings menu.
NOTE: This navigation is the factory default navigation,
which is available when using the MSC-L is stan-
dalone and is not controlled by the TAS. The data
entered on a few screens are validated and the
invalid entry can result in errors.
Fusion4 MSC-L
Installation & Operation Manual
Part No.: 4418309_Rev09
Honeywell