Honeywell Fusion4 MSC-L Installation & Operation Manual page 191

FIGURE 5-2
Part No.: 4418309_Rev09
Honeywell
Operation - Service Tools
The MSC-L uses seven of the Fusion4 IR controller buttons. These
buttons ( , v, <, >, OK, ESC) are provided in bold text in FIGURE 5-2
^
and are explained in detail in section 5.3.4.1 - Basic Navigation
(Fusion4 IR Controller + Fusion4 LAD).
The key functions of the Fusion4 IR Controller
NOTE:
The IR controller range is limited to 3 m/10 ft.

The switch on the right-hand side (if present) is not functional.

5.3.2 Fusion4 Local Access Device
5.3.2.1 General
The Local Access Device (LAD) is a hand-held controller used for
interfacing with the Fusion4 product family, allowing tasks such as
parameter adjustment, alarm resetting, and calibration.
The device facilitates two-way data communication between a parent
device and LAD (see section 5.2 - Service Interfaces).
The functions supported by LAD are as follows:
1. Rapid transfer of transaction data, configuration of files and cali-
bration of records.
Fusion4 MSC-L
Installation & Operation Manual 5 - 3