Safety; Safe Operating Practices - Toro Workman MDE 07299 Operator's Manual

Safety

Improper use or maintenance by the operator or owner can
result in injury. To reduce the potential for injury, comply
with these safety instructions and always pay attention to
the safety alert symbol, which means Caution, Warning, or
Danger—"personal safety instruction." Failure to comply
with the instruction may result in personal injury or death.
The machine meets the requirements of SAE J2258.

Safe Operating Practices

Important: The machine is designed primarily as an
off-road vehicle and is not intended for extensive use on
public roads. When using the machine on public roads,
follow all traffic regulations and use any additional
accessories that may be required by law, such as lights,
turn signals, slow moving vehicle (SMV) sign, and
others as required.
The Workman was designed and tested to offer safe service
when operated and maintained properly. Although hazard
control and accident prevention partially are dependent
upon the design and configuration of the machine, these
factors are also dependent upon the awareness, concern, and
proper training of the personnel involved in the operation,
maintenance and storage of the machine. Improper use or
maintenance of the machine can result in injury or death.
This is a specialized utility vehicle designed for off–road use
only. Its ride and handling will have a different feel than what
drivers experience with passenger cars or trucks. So take time
to become familiar with your Workman.
Not all of the attachments that adapt to the Workman
are covered in this manual. See the specific Operator's
Manual provided with each attachment for additional safety
instructions. Read these manuals.
To reduce the potential for injury or death, comply with
the following safety instructions:
Before Operating
•
Operate the machine only after reading and understanding
the contents of this manual. A replacement manual is
available by sending complete model and serial number
to: The Toro® Company, 8111 Lyndale Avenue South,
Minneapolis, Minnesota 55420.
•
Never allow children to operate the machine. Anyone
who operates the machine should have a motor vehicle
license.
•
Never allow other adults to operate the machine without
first reading and understanding the Operator's Manual.
Only trained and authorized persons should operate this
machine. Make sure that all operators are physically and
mentally capable of operating the machine.
•
This machine is designed to carry only you, the
operator, and one passenger in the seat provided by the
manufacturer. Never carry any other passengers on the
vehicle.
•
Become familiar with the controls and know how to stop
the machine quickly.
•
Never operate the machine when under the influence
of drugs or alcohol. Even prescription drugs and cold
medicines can cause drowsiness.
•
Do not drive the machine when you are tired. Be sure to
take occasional breaks. It is very important that you stay
alert at all times.
•
Always wear substantial shoes when operating the
machine—do not operate the machine while wearing
sandals. Do not wear loose fitting clothing or jewelry
which could get caught in moving parts and cause
personal injury.
•
Wearing safety glasses, safety shoes, long pants and a
helmet is advisable and required by some local safety and
insurance regulations.
•
Keep everyone, especially children and pets, away from
the areas of operation.
•
Keep all shields, safety devices, and decals in place. If a
shield, safety device, or decal is malfunctioning, illegible,
or damaged, repair or replace it before operating the
machine.
•
Avoid driving when it is dark, especially in unfamiliar
areas. If you must drive when it is dark, be sure to drive
cautiously, use the headlights, and even consider adding
additional lights.
•
Before operating the vehicle, always check all parts of
the vehicle and any attachments. If something is wrong,
stop using vehicle. Make sure the problem is corrected
before vehicle or attachment is operated again.
Supervisor's Responsibilities
•
Make sure that operators are thoroughly trained and
familiar with the Operator's Manual and all labels on the
machine.
•
Be sure to establish your own special procedures and
work rules for unusual operating conditions (e.g. slopes
too steep for machine operation).
Note: This machine has a supervisor speed limit switch to
allow you to limit the maximum speed that the operator can
drive the machine.
4