Page 1
Using Smart Tally About Smart Tally Roland’s unique and proprietary wireless tally system uses a wireless LAN router connected to the XS-62S to send tally information to iOS or Android devices on the network. CAM 1 Wi-Fi CAM 2 CAM 3 * Smart Tally is supported in XS-62S program version 1.2 and later.
Page 2
* For details on how to connect the wireless LAN (Wi-Fi), refer to the manual of the device that you’re using. Using a LAN cable, connect the XS-62S’s CONTROL port (LAN) to the wireless LAN router’s LAN port. LAN cable When “STATUS”...
Page 3
You’ll switch to the screen that shows the tally indication. The tally indication is displayed according to the video source that’s selected on the XS-62S. The number in the center of the screen is the channel number. Red: PGM/1...