Whirlpool KEBS177D Use And Care Manual page 27

1. Place food in cold oven.
If you need the Temperature Probe for
your cycle (settings 6 thru 0 in chart on
page 28), insert probe into food. Place
food in oven and plug probe into jack.
2. Press Convect Full Meal pad.
3. Press desired Number pad.
Use the "Convect full meal chart" on page
28 as your guide for selecting a cycle.
NOTES:
•
On double ovens, the cavity symbol
flashes to tell you which oven you
are setting.
• You can change the Convect Full Meal
cycle any time before pressing the Start
pad by repeating Step 3.
• You can program your own setting,
for each oven in double ovens, which
you can then select in the future by
pressing just upper/lower oven Convect
Full Meal and START. (See page 28 for
more information.)
4. Start oven.
5. When the Convect Full Meal
cycle is done:
Four tones will sound, followed by 4
reminder tones (unless they have been
disabled), every minute until you open
the door, remove the probe, or press the
Cancel/Off pad.
U
sing Your Oven
PRESS YOU SEE
to select oven
(for double ovens)
("C" stands for "cycle,"
"F" stands for "favorite")
PRESS
CONVECT
FULL
MEAL
PRESS YOU SEE
1
(example for cycle 1)
PRESS YOU SEE
START
YOU SEE
(double oven display)
HR MIN MIN SEC
HR MIN MIN SEC
DELAY
NIGHT LIGHT
SET
PROBE TEMP
O
RAISING
F
BREAD
DEHYDRATE CONVECTION
ON
ENTER STANDARD COOK TIME
COOK TEMP CLEAN TIME
EASYCONVECT
DELAY
NIGHT LIGHT
SET
PROBE TEMP
O
RAISING
F
BREAD
DEHYDRATE CONVECTION
ON
ENTER STANDARD COOK TIME
COOK TEMP CLEAN TIME
EASYCONVECT
COOK TIME
CHECK
FOOD AT
CLOSE
DOOR
CHECK
FOOD AT
CLOSE
DOOR
27