Whirlpool KEBS177D Use And Care Manual page 25

7. Set temperature (optional).
Do this step if you want to set an oven
temperature other than the one dis-
played.
NOTE: See a reliable cookbook or your
convection oven cookbook for oven
temperature recommendations.
8. Start oven.
NOTES:
• If you do not choose a cook setting
and press START, the oven will default
to bake at 350°F and start. If you want
to cook with another setting or at
another temperature, do Steps 6 and 7
and press START.
•
The oven temperature display will
show the set oven temperature
throughout temperature probe cooking.
•
After the food temperature reaches
130°F, the probe display will show the
actual food temperature at each 5°F
increase and stop at the set tempera-
ture. Four tones will sound (if tones are
not disabled, see page 8) and "End"
will show when food reaches the set
temperature. The oven then shuts off.
• If you want to change the probe
temperature after cooking has begun:
– Unplug the probe, then plug it back
in. You will be prompted for a new
probe temperature. Next, repeat
Steps 5 and 8 in that order. You may
also change the oven temperature at
this point by pressing the desired
cook setting pad again.
OR
– Press Start pad and repeat steps
5-8, in that order. You may also
change the oven temperature at this
point by pressing the desired cook
setting pad again.
U
sing
PRESS YOU SEE
3
7
EASYCONVECT
(example shows 375°F
temperature setting)
5
PRESS YOU SEE
START
EASYCONVECT
(example for Bake)
continued on next page
Y O
our ven
DELAY
NIGHT LIGHT
SET PROBE TEMP
O
RAISING
F
BREAD
DEHYDRATE CONVECTION
ON ENTER STANDARD COOK TIME
COOK TEMP CLEAN TIME
NIGHT LIGHT DELAY
SET
PROBE TEMP
O
RAISING
BREAD
DEHYDRATE CONVECTION
ON
ENTER STANDARD COOK TIME
COOK TEMP CLEAN TIME
CHECK
FOOD AT
CLOSE
DOOR
CHECK
FOOD AT
CLOSE
DOOR
25