Advertisement
Parameter assignment
5.1 Setting elements on the 3RW51 soft starter
⑧
⑨
Prerequisite for adjusting the setting elements
● Slotted screwdriver or cross-tip screwdriver PZ2.
Procedure
Note
Display of setting elements.
Please note that the displays on the setting elements are approximate values which are
under the tolerances limited by the technology.
To perform a detailed setting, a 3RW5 HMI should be used.
● Insert the slotted screwdriver in the opening of the setting element.
● Turn the slotted screwdriver until the arrow of the setting element points to the required
parameter setting.
Tip
Display parameter values in the 3RW5 HMI (accessories)
● 3RW5 HMI Standard
During the setting of parameters at the setting elements, the current value is indicated on
the display of the 3RW5 HMI Standard and undergoes cyclic updating.
● 3RW5 HMI High Feature
During the setting of parameters at the setting elements, the current value is indicated in
the "Parameters > Soft starter > Parameter list" menu on the display of the 3RW5 HMI
High Feature and undergoes cyclic updating.
70
Scale of rated operational current I
RESET / TEST key
Acknowledges faults
•
Performs the user test
•
Parameterization of ON / RUN relay output
•
of the motor
e
Manual, 06/2019, A5E37108631002A/RS-AB/002
3RW51 Soft Starter
Advertisement
