Black Box Type - Furuno FCV-1200L Service Manual

1.2 Black Box Type

The black box type of the FCV-1200L consists of a Interface Unit (IF-8000), a Control Unit (CV-
1201 or CV-1202) and a Processor Unit, as shown in figure 1.2. The monitor unit must be VGA
type or VGA compatible type supplied in local. And it is connected to the Interface Unit IF-8000.
The standard monitor unit MU-101C also can be connected to the IF-8000.
The control unit CV-1201/CV1202 and external NAVAID are connected to the IF-8000.
Note; When external monitor is used, brightness of the display must be
controlled on the monitor.
Navigator
PROCESSOR UNIT
CV-1203 (FCV-1200L)
CV-1203M (FCV-1200LM)
Ship's Mains
12-24 VDC
Rectifier
RU-1746B-2
100/110/115/200/
220/230 VAC
1φ, 50/60 Hzz
: Standard
: Option
: Local Supply
*1: FCV-1200L only
*2: EXIF Assy. required for FCV-1200L.
*3: For sister ship one unit only
Sister ship: EXIF Assy. required for FCV-1200L
Master ship: FCV-1200LM or FCV-1200L equipped with EXIF Assy.
*4: When connecting optional monitor unit, connect it to control unit.
External Monitor
NMEA 0183
Interface Unit
IF-8000
Low
High
Frequency
Frequency
Transducer*1
Transducer*1
Figure 1.2 Black box type
MONITOR UNIT
MU-101C
*4
Water Temp. Sensor
(T-02MSB, etc.)
Net Sonde
FNZ-18
CN7
E/S Interface
HI
CN8
VI-1100A
LO
OR
Transceiver Unit ETR-5D/10D
Telesounder TS-7000/8000 *3
OR
Switch Box
EX-7
2
CONTROL UNIT
CV-1201: Portrait type
CV-1202: Landscape type
Interface Unit
IF-8000
External Monitor
Sonar, Net Recorder,
Telesounder TS-50/80 *3
E/S Interface
Same as above
VI-1100A
Same as above
Picture Recorder
MT-12
E/S Interface VI-1100A
OR
Transmitter Unit ETR-5D/10D
Same as above
Same as above
Same as above
*2