Sharp SH1810C User Manual page 52

Setting ISO Sensitivity
→
"Camera" "Still Camera"
Sensitivity"
1. Select from "Auto", "Auto(High)", "100", "200", "400",
"800", "1600" or "2500".
Continuous Shoot
→
"Camera" "Still Camera"
"Continuous Shoot"
1. Select the desired mode.
The following continuous shoot modes are available:
"Off": The continuous shoots are cancelled.
"4 Pictures"/"9 Pictures" ( / ):
Takes 4 or 9 pictures continuously.
After selecting this mode, select from
"Fast", "Normal", "Slow" or "Manual".
"Overlapped" ( ): Overlaps continuous pictures into one
picture and makes an afterimage.
After selecting this mode, select "Fast" or
"Normal".
Note
• When you select "Manual" to take continuous pictures, press B
manually at the desired speed.
52 Camera
→ →
[Options] "ISO
→ →
[Options] "Modes"
Taking Panorama Pictures
→
"Camera" "Still Camera"
"Panorama"
1. Select "On" and press B.
2. Move the phone slowly to keep the + mark aligned with the
assisting lines, and press B.
3. Select "Save".
→
Note
• The image is captured automatically if the bar in the lower right
turns blue before B is pressed in step 2.
To Set the Assisting Lines
→
"Camera" "Still Camera"
"Panorama Settings"
1. Select "On" or "Off".
Note
• An error message is displayed if you move the phone fast when
taking panorama pictures with this setting on.
→ →
[Options] "Modes"
→ →
[Options] "Settings"
→
"Assisting Lines"
→
→