Sharp SH1810C User Manual page 107

To Reset All Settings for M1 to M12 and Delete All Created
Data
(M 9-12-2)
→
"Settings" "Phone Settings" tab
"Reset All"
1. Enter your handset code.
The default handset code is "9999". For details on changing
the handset code, see "Change Handset Code".
→ →
"Master Reset"
Call Settings
Answer Phone
(M 9-d-1)
When you cannot answer a call, you can record the caller's
message on your phone. After the answering message is played
back, the caller can record a message. You can also use this
function to record the caller's voice during a call.
→
"Settings" "Call Settings" tab
1. Select "Switch On/Off".
2. Select "On" to enable this function.
3. Select one of the following options, if necessary.
"Answer Time": Sets the time before the answering
message is played back when this
function is enabled.
"Guidance Message": The contents of the answering message
can be checked.
"Volume": Sets whether or not to play the caller's
message while it is being recorded.
Note
• The Answer Phone function is not available when the power is
turned off or when the phone is outside the service area.
• Press F while receiving an incoming call to put the call on
hold.
→
"Answer Phone"
Settings 107