Sharp SH1810C User Manual page 30

Note
• The conference call service may not be available on all networks.
Contact your service provider for more information.
• To end the call with all participants, press [Options] and select
"End All Call(s)".
• You have more options for the Conference call after selecting
"Conference All" in step 1:
• To put all participants on hold, select "Hold All".
• To put all participants except the current call on hold, select
"Private".
To Add New Participants to the Conference Call
1. Press [Options] and select "Enter Number".
2. Enter the number you wish to include in the conference call
and press D to dial.
3. Press [Options] and select "Conference All" to join the
conference call.
If you wish to add other participants, repeat steps 1 to 3.
To End the Call with a Conference Call Participant
1. During a conference call, highlight the person that you wish
to disconnect from the conference call.
2. Press [Options] and select "End This Call".
30 Voice Call Functions
To Have a Private Conversation with One of the Participants
1. During a conference call, select the person that you wish to
talk to.
2. Press [Options] and select "Private".
3. Once you have finished the private conversation, press
[Options] and select "Conference All" to return to the
conference call.
Muting the Microphone
1. During a call, press [Mute].
To use the microphone again, press [Unmute].