Table of Contents
Advertisement
Installation (cont'd)
Setting and Joining
The sectional construction of these models enable
them to be joined in line to give the effect of one con-
tinuous display.
An alignment pin kit is supplied with every case and
must be used in alignment.
Leveling
IMPORTANT! IT IS IMPERATIVE THAT CASES
BE LEVELED FROM FRONT TO BACK AND
SIDE TO SIDE PRIOR TO JOINING. A LEVEL
CASE IS NECESSARY TO INSURE PROPER
OPERATION, WATER DRAINAGE, GLASS
ALIGNMENT AND OPERATION OF THE HING-
ES SUPPORTING THE GLASS. LEVELING
THE CASE CORRECTLY WILL SOLVE MOST
HINGE OPERATION PROBLEMS.
CASE BOLTING
LOCATION
SILICONE
SEALANT AREA
Snapping Chalk Lines
Prepare permanent positioning by marking floors
with Chalk snap lines where cases are to be located.
Chalk lines are to run along the base or legs of
cases.
ALIGNMENT PINS
11
Advertisement
Table of Contents
