Fisher-Price R6153 Instruction Sheet page 7

13
• Insert 13 - #8 x ¾" screws into the handle top and tighten.
Grooves
14
• Place the base/handle assembly on a flat surface so that the wheel
retainers are upright.
• Fit the trike onto the base/handle assembly so that the rear frame
rests in the grooves in the base and the front wheel fits between
the wheel retainers in the base/handle.
Assembly
• Position the base/handle covers so that the flared end faces the
• Fit the base/handle covers onto the trike rear frame near the
• Insert two #10 x ¾" screws into each base/handle cover and tighten.
Assembly is now complete.
Wheel Retainers
Base/Handle
7
Trike
Handle Cover
15
Base/Handle
front of the trike.
rear wheels.
Flared End