Headphones Operation; Controls - Dodge DURANGO 2020 Owner's Manual

420 MULTIMEDIA
▾
16. — Push to navigate menus.
◂
17. — Push to navigate menus.
18. OK— Push to select the highlighted option in
a menu.
▴
19. — Push to navigate menus.
H O
EADPHONES PERATION
The headphones receive two separate channels
of audio using an infrared transmitter from the
video screen.
If no audio is heard after increasing the volume
control, verify that the screen is turned on, the
channel is not muted, and the headphone
channel selector switch is on the desired
channel. If audio is still not heard, check that
fully charged batteries are installed in the
headphones.
Rear Seat Entertainment Headphones
1 — Power Button
2 — Volume Control
3 — Channel Selection Switch
C
ONTROLS
The headphone power indicator and controls
are located on the right ear cup.
NOTE:
The rear video system must be turned on before
sound can be heard from the headphones. To
conserve battery life, the headphones will auto-
matically turn off approximately three minutes
after the rear video system is turned off.
Changing the Audio Mode for Headphones
1. Ensure the Remote Control channel/
screen selector switch is in the same
position as the headphone selector switch.
NOTE:
When both the headphone and the remote

control channel selector switches are on
Channel 1, the Remote is controlling Channel
1 and the headphones are tuned to the audio
on Channel 1.
When both the headphone and the remote

control channel selector switches are on
Channel 2, the Remote is controlling Channel
2 and the headphones are tuned to the audio
on Channel 2.
2. Push the SOURCE button on the remote
control.
3. Pushing the SOURCE button will advance to
the next mode.