Clock Operation; Alarm; Setting The Clock Time; Setting The Alarm Time - Grundig PRIMA BOY 100 Manual

CLOCK OPERATION

Setting the clock time

• While the time is being displayed, press the
MODE button and hold it pressed, until the time
indication starts flashing.
• Use the – button to set the hours and the +
button to set the minutes.
– A single press of the – or + button advances the
setting by 1 hour or 1 minute respectively.
If the button is held pressed, the setting advances
rapidly.
– The minutes will not be carried over to the hours
if, for example, the minutes indication changes
from '59' to '00'.
• Press the MODE button once more to store the
setting.
– If no button is pressed within 5 seconds, the time
setting mode stops and the setting is stored
automatically.

Setting the alarm time

• Press the MODE button briefly until the display
shows the current alarm time.
– The alarm indicator ' ' flashes on the display.
• While the alarm time is being indicated, press
and hold down the MODE button until the alarm
time indication starts flashing.
• Use the – button to set the hours and the +
button to set the minutes
(in the same way as the clock time).
• Press the MODE button once more to store the
setting.
– If no button is pressed within 5 seconds, the
alarm time setting mode stops and the setting is
stored automatically.
➥
Prima Boy 100 page 11

ALARM

Wake-up by sound signal
• Press the ALARM button once until the alarm
indicator ' ' appears steadily on the display.
– At the preselected alarm time the sound signal
will switch on and switch off again automatically
90 minutes later.
Interrupting and repeating the alarm
• The electronic sound alarm can be interrupted
with the SNOOZE button.
– After about 5 minutes, the alarm comes on
again.
• It is possible to interrupt the alarm function
several times during the switch-on period.
Switching off the alarm
• The alarm function can be switched off by
pressing the y POWER button.
The alarm remains set to operate the next day.
• If you wish to switch off the alarm completely,
press the ALARM button briefly. The alarm
indicator ' ' disappears.
Going to sleep while listening to
the radio
• Press the SLEEP button briefly.
– The unit switches on the radio and the display
will show the previously set 'sleep' period.
• The 'sleep' time can be adjusted from 90
minutes --> 10 minutes by pressing the SLEEP
button continuously.
– After the preset sleep time has elapsed, the radio
will switch off automatically.
• The SLEEP function can be terminated prema-
turely by pressing the y POWER button.
GB
11