Cleaning The Motor Protection Filter - Bosch Perfectionist BGL8 Series Instruction Manual

Changing the filter
21 21
26 26
Motor protection filter
!
Caution: The vacuum must not
be operated without the motor
protection filter.
Cleaning the motor protection fil-
ter
The motor protection filter should
be cleaned regularly by tapping out
the dirt and rinsing.
21
Fig.
Open the dust bag compartment
lid. Fig.
Release the motor protection
filter by pulling on the side tabs
and pull it out in the direction of
the arrow.
Disconnect the motor protection
filter from the Bionic filter.
Clean the motor protection filter
by tapping out the dirt.
If it is very dirty, the motor pro-
tection filter should be rinsed.
24h 24h
The filter must then be left to dry
Drying Drying
for at least 24 hours.
!
Please note: the Bionic filter
must not come into contact
with water, as this will adverse-
ly affect the correct operation
of the filter.
19