Cleaning The Dust Compartment; Changing The Dust Bag; Cleaning The Motor Protection Filter; Removing The Exhaust Filter - Bosch BGL6 User Manual

Bagged
Hide thumbs Also See for BGL6:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 25

Cleaning the dust compartment

Requirement: The dust bag has
been removed.
→ "Changing the dust bag",
Page 35
If required, vacuum the dust com-
partment using a second appli-
ance or clean it with a dry duster
or dusting brush.
a The dust compartment has been
cleaned.

Changing the dust bag

If the inspection window of the filter
change indicator lights up continu-
ously when the nozzle is raised and
at the highest power level, change
the dust bag.
Requirement: The lid is open.
→ "Opening the lid", Page 34
To close the dust bag, pull the
1.
locking tab.
→ Fig.
22
Remove the full dust bag from the
2.
holder.
Dispose of the full dust bag.
3.
Push the new dust bag into the
4.
holder until it clicks into place.
Do not kink the dust bag.
→ Fig.
23
→ "Closing the lid", Page 34
5.
Cleaning the motor protection
filter
Tip: To achieve the best possible va-
cuuming results, tap out or wash the
motor protection filter regularly. After
vacuuming fine dust particles, clean
or replace the motor protection filter
in order to guarantee the appliance's
suction.
1
Depending on the appliance specifications
Cleaning and servicing en
Requirement: The dust bag has
been removed.
→ "Changing the dust bag",
Page 35
In order to release the motor pro-
1.
tection filter from the catch mech-
anism, pull on the side tabs.
→ Fig.
24
Remove the motor protection filter
2.
in the direction of the arrow.
Tap out the motor protection filter.
3.
If the motor protection filter is very
4.
dirty, rinse it.
→ Fig.
25
Leave the filter to dry for at least
5.
24 hours.
Refit the motor protection filter into
6.
the appliance and lock it in place
at the top.
Insert the dust bag.
7.
→ "Changing the dust bag",
Page 35
→ "Closing the lid", Page 34
8.

Removing the exhaust filter

Requirement: The lid is open.
→ "Opening the lid", Page 34
Push the locking tab in the direc-
1.
tion of the arrow and release the
exhaust filter.
Remove the exhaust filter from the
2.
appliance.
→ Fig.
26

Cleaning the exhaust filter

For optimum performance, clean or
replace the exhaust filter once a year.
Tip: After vacuuming fine dust
particles, clean or replace the ex-
haust filter in order to guarantee the
appliance's suction.
1
1
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bgb6

Table of Contents