Installing The Oil Pressure Switch; Installing The Gear Position Sensor - Yamaha YZF-R1 Series Service Manual

EAS31071

INSTALLING THE OIL PRESSURE SWITCH

1. Install:
• Oil pressure switch "1"
• Oil pressure switch lead "2"
Oil pressure switch
13 N·m (1.3 kgf·m, 9.6 lb·ft)
Oil pressure switch lead bolt
1.8 N·m (0.18 kgf·m, 1.3 lb·ft)
TIP
• Apply Three Bond No. 1215B® to the threads
"a" of the oil pressure switch. However, do not
apply Three Bond No. 1215B® to the portion
"b" of the oil pressure switch.
• Install the oil pressure switch lead so that it is
routed within the range shown in the illustra-
tion.
b
1
EAS31658

INSTALLING THE GEAR POSITION SENSOR

ECA22630
NOTICE
To prevent damage to the gear position sen-
sor, keep magnets (including any pickup tool
with a magnet, magnetized screwdrivers,
etc.) away from the gear position sensor.
1. Install:
• O-ring
New
• Gear position sensor "1"
1
a
2
53˚
5-77
Gear position sensor bolt
4.0 N·m (0.40 kgf·m, 3.0 lb·ft)
LOCTITE®
TIP
• Lubricate the O-ring with lithium-soap-based
grease.
• Fit the end "a" of the shift drum assembly into
the opening "b" in the gear position sensor "1".
a
CRANKCASE
1
b