Safety Notes - Blaupunkt BREMEN SQR 46 DAB Operating Instructions Manual

Safety notes | Road safety

Safety notes

The car sound system was manufactured according to the state of the
art and established safety guidelines. Even so, dangers may occur if you
do not observe the safety notes in these instructions. These instructions
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
contain important information to easily and safely install and operate
the car sound system.
Read these instructions carefully and completely before using the
car sound system.
Keep the instructions at a location so that they are always accessible to
all users.
Always pass on the car sound system to third parties together with
these instructions.
In addition, observe the instructions of the devices used in conjunction
with this car sound system.
Symbols used
These instructions employ the following symbols:
DANGER!
Warns about injuries
DANGER!
Warns about high volume
The CE mark confirms the compliance
with EU directives.
Identifies a sequencing step
Identifies a listing
3
34
CAUTION!
Warns about damaging
the CD drive
AUTORADIO
Road safety
Observe the following notes about road safety:
Use your device in such a way that you can always safely control
your vehicle. In case of doubt, stop at a suitable location and
operate your device while the vehicle is standing.
Always listen at a moderate volume to protect your hearing and to
be able to hear acoustic warning signals (e.g. police sirens). During
mute phases (e.g. when changing the audio source), changing the
volume is not audible. Do not increase the volume during this mute
phase.
General safety notes
Bedienungsanleitung
Observe the following notes to protect yourself against injuries:
Do not modify or open the device. The device contains a Class 1 laser
Operating instructions
that can cause injuries to your eyes.
Do not increase the volume during mute phases, e.g. when
Mode d' emploi
changing the audio source. Changing the volume is not audible
during a mute phase.
Use as directed
Istruzionl of uso
This car sound system is intended for installation and operation in a
vehicle with 12 V vehicle system voltage and must be installed in a
Gebruiksaanwijizing
DIN slot. Observe the performance limits in the technical data. Repairs
and installation, if necessary, should be performed by a specialist.
Bruksanvisining
Installation instructions
You may only install the car sound system yourself if you are experi-
enced in installing car sound systems and are very familiar with the
electrical system of the vehicle. For this purpose, observe the
installation instructions at the end of these instructions.
3