Twin Connect; Telephone Functions - Blaupunkt BREMEN SQR 46 DAB Operating Instructions Manual

Bluetooth®
Search the car sound system from your streaming device (Bluetooth®
name) and establish the connection. Enter the PIN displayed by the
car sound system, if necessary.
The display may show "PAIRED", followed by "CONNECTED", as soon
as the car sound system and the streaming device are paired and
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
connected.
Notes:
If no connection can be established, the display briefly shows
"CONNECT FAILED".
If a Bluetooth® device is connected with the car sound system,
the display shows the Bluetooth® icon .
After switch-on, the car sound system automatically attempts
to reconnect the device connected last. If the connection attem-
ptfails, the display briefly shows "NODEVICE". If necessary, attempt
to re-establish the connection from the Bluetooth® device.

Twin connect

If you want to connect two Bluetooth® devices with the car sound system
at the same time, Twin Connect needs to be activated in the Bluetooth®
menu (see the chapter "Additional functions in the Bluetooth® menu", section
"Activating/deactivating Twin Connect"). If two cell phones are connected
with the car sound system, one of the connected phones must be selected
as master telephone (see the chapter "Additional functions in the Blue-
tooth® menu",section "Managing paired devices"). Upon activating Twin Con-
nect, the currently connected telephone is automatically specified as master
telephone. If no telephone is connected with the car sound system, the
previously connected telephone is specified as master telephone. In the lift
of telephones, an asterisk symbol (
of the master telephone.
Notes:
Only the master telephone is used for outgoing calls.
You can access only the phone book of the master telephone.
You can select the other connected telephone as master telephone
at any time.
15
46
* ) is shown next to the Bluetooth® name
AUTORADIO

Telephone functions

Answering/rejecting an incoming phone call
With an incoming call, the display alternately shows "INCOMING CALL"
and the number of the caller. The current audio source is muted and a
ring tone is played via the loudspeakers of the car sound system.
Note:
If the number of the caller is not being transmitted, the display
shows "PRIVATE NUMBER" instead of the number. If the number
of the caller is stored together with a name, the name of the entry
and the number are displayed (see the section "Storing a phone
number in the car sound system" in this chapter).
Bedienungsanleitung
Press the button to answer the call. "CALL" and the duration of
the ongoing call are displayed.
Operating instructions
Press the button to reject the call or to end the current call.
The display shows "CALL END".
Notes:
Mode d' emploi
During the call, you can adjust the volume with the volume con-
trol or mute the microphone and the loudspeakers with a short
Istruzionl of uso
press to the On/Off button.
You can preset the minimum volume for the call playback in the
Gebruiksaanwijizing
user menu (see the chapter "User settings", section "Making settings
in the "VOLUME" menu", menu item "HANDSFREE VOL").
You can switch the call playback back and forth between the loud
Bruksanvisining
speakers of the car sound system and the cell phone with the
button.
If another call is received during an ongoing phone call, the se-
cond call cannot be answered via the car sound system.
If the car sound system is switched off with active ignition, it au-
tomatically switches on with an incoming call. This allows you to
make the call over the hands-free system. After the call has ended,
the car sound system automatically switches off again.
15