Advertisement
Quick Start Guide Light Controller IP/DALI
• Select and add input devices (e.g. buttons). Should you already
have installed Touch4Light functions, these can be selected here
as well.
• Once an input device has been selected, diverse parameters
can be defined for the functions performed by the input device.
These settings then apply to the selected group.
ADVANTAGE: Input devices can be used with various functions
and parameters in different groups.
• If input devices are to be used to activate a light scene, the
"Scene [M]" function must be assigned to the respective input
devices.
Definition of Light Scenes
Configuration -> Scenes
• Up to 16 different light scenes can be defined per group.
• All scenes assigned in the "Group Functions" menu item are
displayed in the "Scene" menu item.
• Within a scene, all the luminaires in the respective group are
listed and individual light values can be adjusted.
• Individual scenes can thus be created for each group.
Vossloh-Schwabe Deutschland GmbH · Hohe Steinert 8 · 58509 Lüdenscheid · Germany · Tel. +49 (0) 23 51/10 10 · Fax +49 (0) 23 51/10 12 17 · www.vossloh-schwabe.com
ADVANCED FUNCTIONS
„
The "Advanced Functions" menu item contains useful additional
functions with which luminaire groups can be controlled, system
architecture can be displayed or maintenance functions can be
optimised. These must subsequently be integrated into the "Group
Functions" menu.
• Daily Schedule -> Weekly Schedule*
• Astronomical control*
• Room plan
• Component replacement
• Flexible room usage (EnOcean)
• Night-guard*
• Group dynamics
• Random RGB behavior
N
*
This is dependent on the correct system time being
set in the LightBox.
IMPORTANT
NOTES ON USING VS EXTENDERS
„
VS Extenders provide an affordable option for simultaneously
addressing (bundling) up to 64 DALI control gear units with only
one DALI address. Integrating a VS Extender into a light manage-
ment system that includes a VS Light Controller will limit the entire
system to its basic control and adjustment functions. Sensors can
nevertheless be integrated via the primary DALI line. However, all
functions that are based on luminaire feedback will no longer func-
tion properly as long as the VS Extender is connected. These limi-
tations are particularly relevant with regard to Vossloh-Schwabe's
Light Controller IP DALI since functions such as individual addres-
sing, component exchange and automatic error detection and
many others will no longer be available for use.
A Member of the Panasonic Group
4
Advertisement
